EICR — Royal Docks Electrical

A

DETAILS OF THE CLIENT OR PERSON ORDERING THE WORK

Name

Address

Email

Phone

Job Number

B

REASON FOR PRODUCING THIS REPORT

Reason for report *

Date(s) of inspection and testing *

C

DETAILS OF THE INSTALLATION

Occupier

Address of installation

Description of premises

Residential

Commercial

Industrial

Other

Estimated age of wiring system

YEARS

Evidence of additions or alterations

No

Yes

Not Apparent

Installation records available

Yes

No

Date of last inspection

If yes, estimated age since last inspection

YEARS

D

EXTENT AND LIMITATIONS OF INSPECTION AND TESTING

Extent of electrical installation covered by this report

Agreed limitations including reasons

Operational limitations (including the reasons)

Limitations agreed with

Optional limitations on page

BS 7671 amendment

The inspection and testing detailed in this report have been carried out in accordance with BS 7671:2018 as amended to

A2:2022+A3:2024 is withdrawn on 15 Oct 2026 — after that, only A4:2026 may be declared.

E

SUMMARY OF THE CONDITION OF THE INSTALLATION

General condition in terms of electrical safety *

Overall assessment for continued use *

✓ SATISFACTORY

⚠ UNSATISFACTORY *

* An unsatisfactory assessment indicates that dangerous and/or potentially dangerous conditions have been identified.

Alternative source of supply as detailed on attached schedule

F

RECOMMENDATIONS

Where the overall assessment of the suitability of the installation for continued use above is stated as UNSATISFACTORY, any observations classified as ‘Danger present’ (code C1) or ‘Potentially dangerous’ (code C2) should be acted on as a matter of urgency. Any observation classified as ‘Improvement recommended’ (code C3), or ‘Further investigation’ (code FI), is advisory and does not affect the overall assessment but should be given due consideration.

Subject to remedial action, I/we recommend the installation is further inspected and tested by

G

DECLARATION

I/We, being the person(s) responsible for the inspection and testing of the electrical installation (as indicated by my/our signatures below), having exercised reasonable skill and care when carrying out the inspection and testing, hereby declare that the information in this report, including the observations and the attached schedules, provides an accurate assessment of the condition of the electrical installation taking into account the stated extent and limitations.

INSPECTED AND TESTED BY

Name (CAPITALS)

Position

For/on behalf of

Address

Signature

Date

REPORT AUTHORISED FOR ISSUE BY

Name (CAPITALS)

Position

For/on behalf of

Address

Signature

Date

H

SCHEDULES

Schedule(s) of inspection

Schedule(s) of test results

I

SUPPLY CHARACTERISTICS AND EARTHING ARRANGEMENTS

Number and type of live conductors

AC

1-phase 2-wire

2-phase, 3-wire

3-phase 3-wire

3-phase 4-wire

Other

DC

2-wire

3-wire

Other

Confirmation of supply polarity

Nature of Supply Parameters

Nominal voltage U(0)

V

Nominal frequency f(0)

Hz

PFC (Ipf)

kA

Earth fault loop impedance Ze

Ω

Characteristics of primary overcurrent protective device

BS EN

Type

Rated current

A

Short circuit capacity

J

PARTICULARS OF THE INSTALLATION REFERRED TO IN THIS REPORT

Means of earthing

Distributor's facility

Installation earth electrode

Type

Electrode resistance RA

Ω

Location of earth electrode

K

MAIN PROTECTIVE CONDUCTORS

Earthing Conductor

Conductor Material

Conductor CSA

mm²

Continuity check ✓

Main Protective Bonding Conductors

Conductor Material

Conductor CSA

mm²

Continuity check ✓

Bonding of extraneous conductive parts

L

MAIN SWITCH / SWITCH-FUSE / CIRCUIT BREAKER / RCD

Type BS EN

Voltage Rating

V

No. of Poles

Rated Current In

Supply Conductor

Conductor CSA

mm²

RCD Operating Time

RCD Operating Current

M

OBSERVATIONS

No remedial action is required

The following observations are made

FI — Further investigation is advised

C3 — Improvement recommended

C1 — Danger present. Risk of injury. Immediate remedial action is necessary

C2 — Potentially dangerous - urgent remedial action is necessary

Additional observation pages

M

INSPECTION SCHEDULE FOR A SINGLE DISTRIBUTION BOARD INSTALLATION

✓ Acceptable condition

C1 Unacceptable — Danger

C2 Unacceptable — Dangerous

C3 Improvement recommended

FI Further investigation

NV Not Verified

LIM Limitation

N/A Not Applicable

∞

SCHEDULE OF CIRCUIT DETAILS AND TEST RESULTS

DISTRIBUTION BOARD DETAILS

Board designation

Location

Type of wiring

No. of phases

SPD Details

T1

T2

T3

N/A

SPD operational status confirmed

Confirmation of supply polarity and phase sequence

OVERCURRENT PROTECTIVE DEVICE FOR DISTRIBUTION CIRCUIT

BS EN

Rating

Nominal voltage

Zs (Ω)

Ipf (kA)

RCD DETAILS

BS EN

No. of poles

Rating

Disconnection time at ln

Disconnection time at 5ln

TEST INSTRUMENT DETAILS

Multi-function S/N

Insulation resistance S/N

Continuity S/N

Earth electrode S/N

Earth fault loop S/N

RCD S/N

Tested by

Date

Position

Signature

How many circuits to record?

WIRING TYPE CODES:
A Thermoplastic insulated sheathed cables | B Thermoplastic cables in metallic conduit | C Thermoplastic cables in non-metallic conduit
D Thermoplastic cables in metallic trunking | E Thermoplastic cables in non-metallic trunking | F Thermoplastic SWA cables
G Thermosetting SWA cables | H Mineral insulated cables | I Other (please state)

⚡ EICR — Select Job

How many circuits to record?